Carlos, EA1CGK, has built a magnificent Picastar, using Combo P2 boards.

On 17/07/2017 10:53 PM, Carlos Rodríguez wrote:
Dear Glenn!

I started the picastar project in September 2014 and last Friday 14th of July, 2017, I have made my first QSO with my Picastar HF transceiver.

It needs some small adjustments, but is working good in almost all bands.

The output power is good (better in lower bands, 150W..) and the audio is perfect.

I send you some pictures. Feel free to put in your web. <as below>

Thanks again

Carlos EA1CGK

( Carlos designed the panel himself and had it made by www.frontpanelexpress.com)

Front View:-

Partially completed:-

Rear view:-

This page was created on 17th July 2017 and last updated on July 19, 2017 by vk3pe