Nick is building a PICASTAR basd on the orginal G3XJP modules, but factory made PCB's by vk3pe.

Nick reports the receiver is working well and it appears he is well on the way with metalwork for his project also.

Nick appears to be using a G3VPX Trxavr controller, with a 128x64 graphic display < vk3pe>



Sent: Tuesday, May 06, 2014 6:44 PM
Subject: Pic-a-Star

> Good evening, Glenn
> After the break, I continued to build my Pic-a-Star.
> Now the receiver works very well even without
> BPF with In.Vee 80/40 and 3el Yagi for 20/15/10.
> Thank you for your help.
> 73! Nick

page created by vk3pe, 6th May 2014