Roger's (HB9LFU) Combo STAR build.

June 2012

You can add me to the builders list. I have now finished my first Star.
Had a little problem with output on 10MHz but was due to the if-trap
Foto is lousy. Looks better in real.

Will now concentrate on the second board that was supposed to be ready for
putting in the case.


Roger has used 2mm PCB material to make his case. The PCB material was bought cut to size, as Roger has very limited workshop facilities. Display is a 128 x 64 dot graphic type, driven by Trxavrb board.

Click for larger size.

Page created 26th June 2012 <vk3pe>